Interior, exterior and specialty finishes worth standing close to.
Lane Built is a licensed interior and exterior painting contractor serving Loomis, Rocklin, Roseville, Granite Bay, Folsom and El Dorado Hills. Limewash, Venetian plaster, Italian cabinet coatings and full-home repaints for high-end homes, developers and commercial property across Northern California.
The difference is almost always what happened before the first coat went on. We finish custom homes and commercial buildings, refinish cabinetry with Italian coating systems, and apply mineral finishes to brick, stone and stucco. Same crew, same standard, whether we built the house or not.
Wash, scrape, sand, patch, caulk, spot prime. The coat only lasts as long as what is under it.
European enamels, Italian cabinet systems and mineral coatings, specified per surface.
Sprayed, back-rolled or laid off by hand at the manufacturer's spread rate.
Punched with you, touched up, and leftover product labeled by room.
Doors come off, get labeled, cleaned and sanded, then sprayed in a controlled setup with ICRO and Renner waterborne and catalyzed systems. What goes back on the box is flat, hard and even, with no brush track and no tacky edges six months later.
Romabio Classico Limewash soaks into brick and stone and can be left uniform or lightly distressed so the masonry reads through. Masonry Flat gives a solid, breathable color change. Neither one peels off in sheets the way film-forming paint does.
Meoded Venetian plaster, burnished lime finishes and metallic glazes for the walls that carry a room: entry vestibules, hearth surrounds, powder baths, feature ceilings. Sampled on site under your own light before anything gets committed.
Tall atriums and skylit stairwells are the hardest rooms to paint. Raking daylight finds every skim, seam and roller mark, so the prep gets the hours and the finish coat gets sprayed and back-rolled to a level that holds up at noon.
01Custom homes, remodels, additions and full-home repaints across Loomis, Granite Bay, Rocklin, Roseville, Folsom and El Dorado Hills.
02Offices, retail, multifamily and property management portfolios, phased around your operating hours so the work does not cost you business days.
03Production capable and detail driven. We run new residential and commercial work from drywall primer through final punch.
Drywall repair, caulking, sanding and priming come before color. Then professional grade coating systems, applied at spec, room by room or whole house.
Pressure washing, scraping, sanding, caulking, spot priming and removal of failing coatings, all before any finish paint goes on.
We look at what is actually on the walls: chalking stucco, failing caulk joints, sun-baked south elevations. Then we write the prep and the exact product line, not just a sq ft price.
Pressure washing, scraping, sanding, patching, caulking and spot priming. Failing coatings come off before finish paint goes on. This is where a paint job is won or lost, and it is the first thing a cheap bid cuts.
Fine Paints of Europe, ICRO, Renner, Meoded and Romabio where the finish calls for it, professional Sherwin-Williams and Benjamin Moore systems where it does not.
Sprayed, back-rolled or brushed to the manufacturer's spread rate, two coats where two coats belong, with masking and protection so floors and landscaping come out the way they went in.
We punch the job with you, fix what you point at, and label leftover product by room for the next time.
High-build enamels and heritage-grade interior finishes
Italian waterborne and catalyzed cabinet systems
Millwork, built-ins and architectural wood finishes
Venetian plaster, metallics and decorative wall finishes
Classico Limewash and Masonry Flat mineral coatings
Production interior and exterior systems
Send the address and what you are after. We will walk it, write the prep and the product line, and tell you what it will actually take.
